Installing Binance on Mac via dmg: The Complete Steps From Download to First Login
Installing the Binance client on Mac means going through a dmg installer, since there's no Mac App Store distribution. Download the roughly 148MB dmg from the Binance official site, mount it by double-clicking, drag it into Applications, then clear the Gatekeeper quarantine flag via Terminal before launching. This guide walks through all 7 steps from download to first login, including macOS 11+ requirements and permission prompts.
Installing the Binance client on Mac follows the standard dmg installer flow - there's no Mac App Store channel. Short answer: download the dmg (about 148MB) from the Binance official website, double-click to mount it, drag Binance.app into Applications, then run sudo xattr -cr in Terminal to clear the Gatekeeper quarantine flag, and finally launch it and sign in. If everything goes smoothly, the whole process takes about 5 minutes.
First, confirm your macOS version - the dmg on the Binance Official Site requires macOS 11 (Big Sur) or later, and won't install on older systems. Apple Silicon (M1/M2/M3) and Intel chips use the same dmg, no need to pick a different one.
Pre-Install Environment Check
Check whether your Mac meets the requirements before you download, so you don't find out it won't install after the fact.
| Check item | Requirement | How to check |
|---|---|---|
| macOS version | 11 (Big Sur) or later | Apple menu (top left) → About This Mac |
| Chip architecture | Intel or Apple Silicon, either works | About This Mac → Chip |
| Free space | At least 500MB | About This Mac → Storage |
| Network | Can reach binance.com | Test in a browser |
| Admin privileges | Current account is an administrator | System Settings → Users & Groups |
If your macOS is 10.15 (Catalina) or older, the new dmg will crash after installing - it's best to upgrade your system first. Apple Silicon Macs running an Intel-only build would normally use Rosetta 2 automatically, but the official dmg is a universal binary that runs natively on both architectures.
Step 1: Download the dmg From the Official Site
The dmg installer must be downloaded directly from the Binance Official Site - third-party download sites are very likely to bundle a modified app.
How to Get There
- Open binance.com in your browser
- Find the Download entry in the top right
- Select the macOS platform
- Click "Download for Mac" to start downloading the dmg
- The file is about 148MB, named something like
Binance-macOS-X.X.X.dmg
While it's downloading, check that the URL is the main binance.com domain or one of its CDN subdomains - don't click "download now" buttons in ad slots, they often lead to phishing sites.
Verify After Downloading
# In Terminal, go into your Downloads folder to check the file
cd ~/Downloads
ls -lh Binance*.dmg
The file size should be between 145-155MB. Anything noticeably smaller means the download was interrupted and needs to be redone.
Step 2: Double-Click to Mount the dmg
The downloaded dmg is a disk image, and double-clicking it lets macOS mount it automatically.
The Mounting Process
- Find the newly downloaded Binance dmg in Finder
- Double-click the file
- macOS verifies the image's integrity (about 5-10 seconds)
- A new window pops up containing a Binance icon and a shortcut to the Applications folder
If double-clicking does nothing, or you get a "can't be mounted" message, the dmg file is corrupted and needs to be redownloaded.
What's in the Mount Window
The window you see is structured like this:
┌────────────────────────────┐
│ Binance.app → 📁 Applications │
└────────────────────────────┘
The arrow in the middle is a visual hint telling you to just drag the icon over.
Step 3: Drag Into the Applications Folder
Drag Binance.app onto the Applications folder shortcut.
Standard Steps
- Click and hold on the Binance icon
- Drag it onto the Applications folder on the right
- Release the mouse button to start copying
- The copy takes about 5-15 seconds (depending on disk speed)
- Once copying finishes, the app is installed
Things Not to Do
- Don't drag Binance.app to the Desktop or Documents - those aren't standard locations, and some system features won't work correctly
- Don't double-click Binance directly from inside the dmg window to launch it - doing so runs the app from inside the mounted image, and it'll error out once you eject the dmg
- Don't keep the dmg file around - once installed, you can drag it straight to the Trash to save space
Ejecting the dmg
Once installed, right-click the Binance dmg image on your desktop or in the Finder sidebar and choose "Eject."
Step 4: Clear the Gatekeeper Quarantine Flag
The first time you launch Binance, macOS Gatekeeper will block it, so you need to clear the quarantine flag first. This is the step where most people get stuck installing Binance on Mac.
The Terminal Command
Open Terminal (search "Terminal" in Spotlight, or find it under Applications/Utilities):
sudo xattr -cr /Applications/Binance.app
Press Enter and type your macOS user password (nothing shows on screen as you type - that's normal, just press Enter when done).
Breaking Down the Command
sudo: administrator privilegesxattr: the command for managing extended attributes-c: clear - removes the attribute-r: recursive - applies to every file inside the .app bundle/Applications/Binance.app: the target path
Why This Step Is Necessary
The Binance macOS client hasn't gone through Apple Notarization, so the downloaded dmg file automatically gets a com.apple.quarantine extended attribute added by macOS. When the system detects that attribute together with a non-notarized app, it immediately shows "is damaged."
For the full explanation of Gatekeeper's blocking logic and three ways to work around it, see Fixing "is damaged" on Mac.
Step 5: First Launch
After clearing the quarantine flag, go to the Applications folder and double-click Binance.app.
What a Normal Launch Looks Like
- The Binance startup logo appears (about 2-3 seconds)
- Language resources load
- You land on the sign-in screen
Occasionally a Second Warning Appears
Some macOS 13+ systems still show this on first launch:
macOS cannot verify the developer of Binance
Are you sure you want to open it?
Just click "Open" and it won't appear again afterward.
If clicking "Open" still doesn't work, go to System Settings → Privacy & Security → scroll to the bottom "Security" section, where you'll see a "Binance was blocked" notice - click "Open Anyway."
Step 6: Grant System Permissions
The first time it launches, Binance will request a few permissions.
| Permission | Grant it? | Why |
|---|---|---|
| Notifications | Yes | For login and withdrawal alerts |
| Camera | Yes | For KYC liveness checks, QR code sign-in |
| Microphone | No | The app doesn't need it |
| Contacts | No | The app doesn't need it |
| Location | No | The app doesn't need it |
| Files and Folders | Grant access to Downloads | For uploading ID documents during KYC |
Always deny Contacts, Location, and Microphone - the Binance client works fully without them. If it ever requests these permissions, the app may have been tampered with - uninstall it immediately and redownload from the Binance Official Site.
Step 7: Sign In
Once you reach the sign-in screen, enter your account email/phone number and password.
Sign-In Methods
- Email + password: the standard method
- Phone number + password: works if you registered with a phone number
- QR code sign-in: scan the desktop QR code with your already-signed-in mobile app (the fastest option)
First-Login Security Prompts
Signing in from a new device triggers email verification plus 2FA:
- Get a 6-digit email verification code (valid for 5 minutes)
- Enter your Google Authenticator code or SMS 2FA code
- Some accounts also require device authorization (manually approving the new device from inside the app)
Once verified, you land on the main screen. The first load is a bit slower (loading candlestick data, order history) - about 10-20 seconds.
Desktop Client vs. Web Version
After installing, a lot of people ask what the difference is between the client and using Binance Official Site directly in a browser.
| Aspect | Desktop client | Web version |
|---|---|---|
| Install | Requires the dmg install | Opens directly in a browser |
| Launch speed | 1-2 seconds (once running) | Depends on browser loading |
| Memory usage | ~600MB | ~300MB |
| Push notifications | Native system-level notifications | Browser notifications (can be blocked) |
| Multiple accounts | Single account by default | Multiple tabs allow multiple accounts |
| Chart performance | Renders smoothly | Complex charts can lag slightly |
| Phishing risk | Nearly zero (package name is verified) | Risk of mistyping the domain |
For a detailed comparison, see Desktop Client vs. Web Version.
Install Path and File Locations
Knowing where client files live is useful for future maintenance or uninstalling.
| File type | Path |
|---|---|
| Main program | /Applications/Binance.app |
| User data | ~/Library/Application Support/Binance/ |
| Cache | ~/Library/Caches/com.binance.* |
| Preferences | ~/Library/Preferences/com.binance.*.plist |
| Logs | ~/Library/Logs/Binance/ |
If you need to fully uninstall it later, just deleting the app in Applications isn't enough - you need to clean out these directories too. For the complete uninstall process, see Removing leftover Binance files on Mac.
Common Install Failures
| Symptom | Cause | Fix |
|---|---|---|
| Double-clicking the dmg does nothing | Incomplete download | Redownload |
| "Can't be mounted" | dmg is corrupted | Redownload |
| "Insufficient permissions" while dragging | Current account isn't an administrator | Switch to an administrator account |
| "Is damaged" on launch | Quarantine flag wasn't cleared | Run the sudo xattr command |
| White screen crash on launch | macOS version too old | Upgrade to macOS 11+ |
| Can't connect after launch | Network restriction | Check your network or switch networks |
Update Strategy Going Forward
The Binance macOS client doesn't auto-update through the Mac App Store. Every upgrade means going through the dmg flow again:
- Fully quit Binance (menu bar Binance → Quit)
- Download the new dmg from the Binance Official Site
- Drag it into Applications - when you see "an item with the same name already exists," click "Replace"
- Rerun
sudo xattr -cr /Applications/Binance.app - Launch it - you'll remain signed in, no need to log in again
For the full app update strategy, see Binance App update strategy.
FAQ
Q: About how big is the Binance dmg file on Mac? A: About 148MB. If it finishes downloading at under 140MB, the download was interrupted and needs to be redone.
Q: Do M1/M2/M3 Macs need a different version to install Binance? A: No. The Binance macOS dmg is a universal binary containing both Intel and Apple Silicon architectures, so you download the exact same file either way.
Q: Can I install to a location other than Applications? A: Technically yes, but you'd need to change the path in the sudo xattr command to match your actual install location, and some macOS security policies may impose extra restrictions on apps outside Applications. It's best to install to the default /Applications/ path.
Q: Do I need to keep the dmg around after installing? A: No. The installed .app runs independently - the dmg was only the installer. You can delete it right away to save space.
Q: Can I install it on an external drive? A: Technically yes, but it's not recommended. The app fails to launch if the external drive is disconnected, and some macOS signature verification gets more complicated. It's best to install to the internal SSD's /Applications/.
Q: Why can't I find Binance in the Mac App Store? A: Binance isn't listed on the Mac App Store - the only way to install it is via the dmg from the official website. Any "Binance" you find by searching the Mac App Store is a counterfeit.
Q: Do I need to install any additional browser extensions after installing the Mac client? A: No. The desktop client is a standalone app and doesn't rely on any browser extensions.
Q: Does installing Binance on Mac leave a background process running? A: There's one main process (Binance Helper). Once you fully quit the app, there's no leftover process - you can check with Activity Monitor by searching "binance."